Frequently Asked Questions

You can get a Thru-the-Wall Air Conditioner or Ductless split system.
Your best bet is Thru-the-Wall Air Conditioner or Ductless split system.
Thru-the-wall Air conditioners are essentially Room Air conditioners, not fitted onto windows but into the walls to brighten up the decor of the room. The AC units are placed through a hole in an exterior wall and require the installation of waterproof membranes and a sleeve to hold the unit.

Another form of a thru the wall A/C is Heating + Cooling( electronic or hydronic)
CoolAir, Inc has professional technicians/workers to make it totally hassle-free for you. If you have a hole in the wall, the process is quick. If not, we can do it for you; call us
The Sleeves and Exterior grilles do not come with the AC units and have to be purchased separately. In some cases, you may have to buy the grilles separately to suit your needs for a particular look.
To learn more about hole-cutting, slide-out chassis, through-the-wall chassis, Hole-cutting into your walls Click Here
There are different types of air conditioners and also different types of cleanings, we cannot be specific but the most common and recommended air conditioning cleanings are:

1. Preseason Clean(in house)
2. SteamCleaning(in warehouse)
We vacuum front vents, control board, front cover, outer portion of air conditioner unit + evaporator. Make sure A/C unit is properly insulated to prevent a heavy draft. Spray coils with evaporator cleaner to degrease front coils and get excess dirt left from vacuum. Use special A/C cleaners to give a nice wipe down of front cover, control board, wire leading to outlet front vents and all along visible outter portion of unit inside apartment or house. After front cover is cleaned and placed back in it's proper place we change or clean the filter.
Chemical wash of unit must be removed for 3-5 business days taken to warehouse to be cleaned.The unit(s) will be picked up by technicians. They will cover the hole to help prevent heavy drafts and bugs. In our warehouse the unit is take apart piece by piece in order to assure that the electrical parts can be sealed to prevent water damage. We will use special procedures to clean and wash fan blade, blower, evaporator, and all other portions of the unit. Finally the unit will be rinsed thoroughly and left to dry; after putting it back together the AC unit will then be spray painted for a fresh look and feel. The unit is returned and installed in your place by our A/C technicians.
A more extensive diagnostic check can be done in warehouse with the Steam-Clean also let's look at some reasons why your A/C needs a Steam-Clean:

1. If unit is leaking there could be a blocked drain, this not allow unit to leak out the back.
2. Possibly if the unit doesn't cool properly, the condenser or evaporator coils may be clogged.
3. If there is a degree flying out of units Front vents.